Almost 75% of all elements are metals. Metals are used in electronics for wires and in cookware for pots and pans because they conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than the other elemental substances. Two or more metals can be alloyed to create materials with properties that do not exist in a pure metal. All metals can be classified as either ferrous or non-ferrous. Ferrous metals contain iron and non-ferrous metals do not. All ferrous metals are magnetic and have poor corrosion resistance while non-ferrous metals are typically non-magnetic and have more corrosion resistance. An overview of the most common ferrous and non-ferrous metals is shown below.
Every time before we send the mould we must check plastic material choose, as only after confirmed that we can give client good advice for steel choose
Injection molding machines have many components and are available in different configurations, including a horizontal configuration and a vertical configuration. However, regardless of their design, all injection molding machines utilize a power source, injection unit, mold assembly, and clamping unit to perform the four stages of the process cycle.