PP Baby round shape Hanger Injection Mould with mirror polish

-If this baby hanger mould can designed much more cavities? Yes, can be. That depend on client’s machine type. if bigger machine then will design more cavities. -If this baby hanger mould easy get flash or not? Not easy, as we make all ejectors holes by slow wire line cutting always. -If this...

PP Baby round shape Hanger Injection Mould with mirror polish


  2-3.jpg



Baby hanger mould

Mold Size

450x450mm / advice choose 200Ton injection machine

Mold cavity

2 cavities

Mold Steel

718H steel, the original hardness is HRC32 degree

Mold steel treatment way

At final arranged hardness treatment for the core and cavity plates to HRC48-52 degree thur. nitrogen treatment

Mold gate way

Cold runner

Mold uselife

600000 shots

Mold cycle time

35 sec

1st. Test mold time

45 days after confirmed mold drawing files

Mold doff way

ejectors

Package

PET film covered then packing into standard wooden case


FAQ:


-If this baby hanger mould can designed much more cavities?

Yes, can be. That depend on client’s machine type. if bigger machine then will design more cavities.


-If this baby hanger mould easy get flash or not?

Not easy, as we make all ejectors holes by slow wire line cutting always.


-If this baby hanger mould can work full automatic or not?

Yes, sure. Must 100% work full automatic.


If need more information about this mould, pls contact with us. tks!


WORK STEP.jpg


Technology

1) Mould structure design

Professional designers provide you with reasonably designed mould to shorten cycle hours.

Reducing unnecessary procedure improves efficiency.

2) Mould cooling system

According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.

3) Accessory for mould

Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life. 

4) Deal with mould

Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850


Service

1) We can repair the mould in one year for some free and provide technology. . 

2) Gurantee  period is 12months starting from the date of moulds accept in the Buyer’s factory.

3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product  can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.


If you have any interest in our PP Baby round shape Hanger Injection Mould with mirror polish, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.

Related Products