3.6G Good Quality PS Fork Mould With Fast Cycle Time

3.6G Good Quality PS Fork Mould With Fast Cycle Time

Good quality strong PS fork mould details Fork mould cavity and core photos shown As choose 718H steel, then at final need choose thur. nitrogen treatment in order to make sure long use-life, but if so, the mould whole plates looks not brightness, if possible, we advice choose hardness steel,...

Good quality strong PS fork mould details
Item3.6G fork injection mould
Cavity20 cavities
Fix machine188Ton normal injection machine
Cycle time15 sec / shot
First sample time45 days
Steel718H, C50


Fork mould cavity and core photos shown
IMG_9545.jpg

Fork mould cavity plate


IMG_9547.jpg

Fork mould core plate


As choose 718H steel, then at final need choose thur. nitrogen treatment in order to make sure long use-life, but if so, the mould whole plates looks not brightness, if possible, we advice choose hardness steel, such as H13. tks!


Fork mold arrange shipment photos shown
IMG_7817.JPG

Packing shown


IMG_7818.JPG

Spare parts photos

-We will arrange spray enough antirust agent on cavity and core plates inside, then put enough oil mix with butter outside of mould, after that covered by PE film, then hold by wooden stick, after that covered into wooden case.

-Always we will give some spare parts to client for free when arrange shipment, in order to make sure in the furture if some parts need change, they can do it easy and by themself direct.


If you have any interest in our 3.6g good quality ps fork mould with fast cycle time, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.
Hot Tags: 3.6g good quality ps fork mould with fast cycle time, China, factory, manufacturers, suppliers, customized
Related Products