Rectangle Rattan Designed Basket Injection Mould with 4 Sliders Work Full Automatic

-If this basket rattan can make another design? Sure, we can make a lot of different rattan for client, we can offer some sample for choose, here are more photos shown for basket, pls check then know more clearly. tks! -If the slider close area easy get flash or not? Not easy, as all of the edge...

Rectangle Rattan Designed Basket Injection Mould with 4 Sliders Work Full Automatic

  IMG_6589.JPG


Rectangle rattan designed basket mould

Mold Size

680x600mm / advice choose 450Ton injection machine

Mold cavity

single cavity

Mold Steel

718H steel, the original hardness is HRC30 degree

Mold steel treatment way

At final arranged hardness treatment for the core and cavity plates thur. nitrogen to HRC48-52 degree

Mold gate way

Hot runner system (point gate)

Mold uselife

500000 shots

Mold cycle time

33 sec

1st. Test mold time

60 days after confirmed mold drawing files

Mold doff way

Choose air gates

Package

PET film covered then packing into standard wooden case


FAQ:

-If this basket rattan can make another design?

Sure, we can make a lot of different rattan for client, we can offer some sample for choose, here are more photos shown for basket, pls check then know more clearly. tks!

-If the slider close area easy get flash or not?

Not easy, as all of the edge area already arranged spec. hardness treatment, meantime, the thickness for this type of basket not too thin, no need too high pressure always.

-If this basket mould can work full automatic or not?

Yes, it can be. But didn’t advice work full automatic as easy get scratch if doff system automatic.


Here are more crate moulds photos shown


  23-1.jpg

  IMG_0854.jpg

   P1100280.JPG

  P1100345.jpg


Process

Mold steel

P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more

Mold cavity

1 or more (depend on client)

Surface treatments

electroplate (in order to prevent rust), thur. nitrogen (in order to rise surface hardness), vacuum quenching (in order to rise whole hardness)

Plastic materials

PP, PVC, PPR, ABS, PA, PC, POM, PS, PET, HDPE, LDPE and other

Software

UG, PRO-E, MOLDFLOW, CAD, CAE, VISI

Mold gate way

cold runner/hot runner/semi-hot runner

Mold base

HASCO, DME, LKM, HOME-MADE

Mold doff system

ejectors, off-plate, air valves, hydraulic jars, air jars, air ejectors, oil-motor and more

Mold cooling

Water cooling/air cooling/beryllium bronze cooling

Mold payment

50% down payment by T/T, 50% balance by T/T before shipment

Mold shipment

By sea/air/train

Mold packaging

packed into standard wooden cases

Mold quotation

most reasonable as rich experience


Technology

1) Mould structure design

Professional designers provide you with reasonably designed mould to shorten cycle hours.

Reducing unnecessary procedure improves efficiency.

2) Mould cooling system

According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.

3) Accessory for mould

Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life. 

4) Deal with mould

Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850


Service

1) We can repair the mould in one year for some free and provide technology. . 

2) Gurantee  period is 12months starting from the date of moulds accept in the Buyer’s factory.

3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product  can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.


If you have any interest in our rectangle rattan designed basket injection mould with 4 sliders work full automatic, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.

Related Products