PP Material without Cover Porous Dirty Clothes Basket Mould Work by Air Gates and Air Ejector

-If this basket mould can work full automatic or not? Yes, we designed ejectors under the edge, not only use for work automatic, but also make sure not easy to see and looks prefect basket at final; -If this clothes basket mould porous can designed by other shape or not? Yes, can be designed and...

PP Material without Cover Porous Dirty Clothes Basket Mould Work by Air Gates and Air Ejector

 7.jpg



Without cover clothes basket mould

Mold Size

780x650mm / advice choose 800Ton injection machine

Mold cavity

single cavity

Mold Steel

P20 Forging steel, the original hardness is HRC25-28 degree

Mold steel treatment way

At final arranged hardness treatment for the core and cavity plates to HRC32 degree

Mold gate way

Hot runner system (3 Gates)

Mold uselife

400000 shots

Mold cycle time

56 sec

1st. Test mold time

70 days after confirmed mold drawing files

Mold doff way

Choose ejectors

Package

PET film covered then packing into standard wooden case



-If this basket mould can work full automatic or not?

Yes, we designed ejectors under the edge, not only use for work automatic, but also make sure not easy to see and looks prefect basket at final;

-If this clothes basket mould porous can designed by other shape or not?

Yes, can be designed and make;

-If this clothes basket mould porous area sharp or not?

This clothes basket mould as designed too many porous, and without slider, the interdigitation area must designed by sharp, if not so, can’t doff mould. but if would like choose sliders design will solve this problem;

-If this clothes basket mould fill material even or not?

Yes, this basket mould we designed total 3 gates, not only make sure fill material even and easy, but also make sure air vent can be solved.


Process

Mold steel

P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more

Mold cavity

1 or more (depend on client)

Surface treatments

electroplate (in order to prevent rust), thur. nitrogen (in order to rise surface hardness), vacuum quenching (in order to rise whole hardness)

Plastic materials

PP, PVC, PPR, ABS, PA, PC, POM, PS, PET, HDPE, LDPE and other

Software

UG, PRO-E, MOLDFLOW, CAD, CAE, VISI

Mold gate way

cold runner/hot runner/semi-hot runner

Mold base

HASCO, DME, LKM, HOME-MADE

Mold doff system

ejectors, off-plate, air valves, hydraulic jars, air jars, air ejectors, oil-motor and more

Mold cooling

Water cooling/air cooling/beryllium bronze cooling

Mold payment

50% down payment by T/T, 50% balance by T/T before shipment

Mold shipment

By sea/air/train

Mold packaging

packed into standard wooden cases

Mold quotation

most reasonable as rich experience


Technology

1) Mould structure design

Professional designers provide you with reasonably designed mould to shorten cycle hours.

Reducing unnecessary procedure improves efficiency.

2) Mould cooling system

According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.

3) Accessory for mould

Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life. 

4) Deal with mould

Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850


Service

1) We can repair the mould in one year for some free and provide technology. . 

2) Gurantee  period is 12months starting from the date of moulds accept in the Buyer’s factory.

3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product  can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.


If you have any interest in our pp material without cover porous dirty clothes basket mould work by air gates and air ejector, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.

Related Products