-If this clothes basket mould porous area sharp or not? This clothes basket mould as designed too many porous, and without slider, the interdigitation area must designed by sharp, if not so, can’t doff mould. but if would like choose sliders design will solve this problem. -If this clothes...
With cover clothes basket mould
950x800mm / advice choose 1250Ton injection machine
P20 Forging steel, the original hardness is HRC25-28 degree
Mold steel treatment way
At final arranged hardness treatment for the core and cavity plates to HRC32 degree
Mold gate way
Hot runner system (5 Gates)
Mold cycle time
1st. Test mold time
70 days after confirmed mold drawing files
Mold doff way
Choose ejector jars
PET film covered then packing into standard wooden case
-If this clothes basket mould porous area sharp or not?
This clothes basket mould as designed too many porous, and without slider, the interdigitation area must designed by sharp, if not so, can’t doff mould. but if would like choose sliders design will solve this problem.
-If this clothes basket mould fill material even or not?
Yes, this basket mould we designed total 5 gates, not only make sure fill material even and easy, but also make sure air vent can be solved.
-If this basket mould can work full automatic or not?
Can be designed, but on normal choose semi-automatic.
P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more
1 or more (depend on client)
electroplate (in order to prevent rust), thur. nitrogen (in order to rise surface hardness), vacuum quenching (in order to rise whole hardness)
PP, PVC, PPR, ABS, PA, PC, POM, PS, PET, HDPE, LDPE and other
UG, PRO-E, MOLDFLOW, CAD, CAE, VISI
Mold gate way
cold runner/hot runner/semi-hot runner
HASCO, DME, LKM, HOME-MADE
Mold doff system
ejectors, off-plate, air valves, hydraulic jars, air jars, air ejectors, oil-motor and more
Water cooling/air cooling/beryllium bronze cooling
50% down payment by T/T, 50% balance by T/T before shipment
packed into standard wooden cases
most reasonable as rich experience
1) Mould structure design
Professional designers provide you with reasonably designed mould to shorten cycle hours.
Reducing unnecessary procedure improves efficiency.
2) Mould cooling system
According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.
3) Accessory for mould
Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life.
4) Deal with mould
Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850
1) We can repair the mould in one year for some free and provide technology. .
2) Gurantee period is 12months starting from the date of moulds accept in the Buyer’s factory.
3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.
If you have any interest in our pp material porous clothes crate injection mold with cover designed, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.