PP Material 100L Dustbin Cover Injection Mold Work Full Automatic By Air System

PP Material 100L Dustbin Cover Injection Mold Work Full Automatic By Air System

This 100L dustbin cover mould we advice choose 450Ton normal injection machine, cycle time about 45 sec each shot.

PP Material 100L dustbin cover injection mold


FAQ:


  1. If this dustbin cover mould can work full automatic or not? 

      Yes, it can be work full automatic by air system, but on normal we advice fetch the cover down from mold by robot or human.


   2. Which gate way choose for this dustbin cover mould?

       OSKAI mould advice choose cold runner big gate, if choose re-cycle material also no problem.




IMG_9409.jpg

Mould Core


IMG_94071.jpg

Mould Cavity


ITEM100L Dustbin cover injection mold
Cavity1
Steel
718 Forging, C50
Hardness treatmentArrange the core and cavity plate issue line area by queching treatment
1st. Sample time55 days after confrimed mould design
Payment40% as DP by T/T before make design, 60% balance should be paid by T/T after confrimed sample


100L dustbin cover injection mold cavity and core plate details photo shown, on the cavity make morden texture treatment, for the core plate arranged hand polish by stone.


IMG_9408.jpg

Mould cavity plate details


IMG_9410.jpg

Mould core plate details


About the packing: OSKAI mould will arrange whole mould covered by PE film and then put into wooden case.


This 100L dustbin cover mould we advice choose 450Ton normal injection machine, cycle time about 45 sec each shot.


IMG_9407.jpg

sample with mold shown


IMG_8029.JPG

sample photo


Technology

 

1) Mould structure design

Professional designers provide you with reasonably designed mould to shorten cycle hours.

Reducing unnecessary procedure improves efficiency.

 

2) Mould cooling system

According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.

 

3) Accessory for mould

Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life.

 

4) Deal with mould

 Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850


If you have any interest in our pp material 100l dustbin cover injection mold work full automatic by air system, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.
Hot Tags: pp material 100l dustbin cover injection mold work full automatic by air system, China, factory, manufacturers, suppliers, customized
Related Products